You water on schedule, your sprinklers run every morning, and yet those brown, crunchy patches keep showing up. At LaPorte Sprinkler Repair, dry spots are one of the most common lawn complaints we hear from homeowners in LaPorte, and they’re frustrating because they make it seem like your system isn’t doing its job.
The good news is that dry spots almost always have a clear cause. Most come down to a handful of fixable problems with your sprinkler heads, water pressure, valves, coverage, or controller. Below, we’ll walk through each one, show you how to spot it, and explain when it’s time to bring in a pro.
If you’d rather skip the guesswork, the team at LaPorte Sprinkler Repair can track down the problem fast. Call 832-353-1516 to request service.
A brown patch might look like a small cosmetic issue, but it’s often a sign that something in your irrigation system isn’t working right. Left alone, dry spots tend to spread. Stressed grass is also more open to weeds, pests, and disease.
The heat along the Texas Gulf Coast makes things worse. When temperatures climb, a lawn that misses even a few watering cycles can decline quickly. Catching the problem early saves your grass and helps you avoid paying for water that never reaches the right places.
This is the most common cause of dry spots, and it’s usually the easiest to fix.
Sprinkler heads take a beating. Lawn mowers clip them, cars roll over them, and foot traffic pushes them out of place. Over time, dirt, sand, grass clippings, and mineral buildup can also clog the nozzles and filters inside.
Signs to look for:
How to check it: Turn on each zone and walk your yard while it runs. Watch every head closely. A clogged nozzle can sometimes be rinsed clean, but cracked heads, broken risers, and damaged internal parts usually need to be replaced.
Our technicians handle sprinkler head repair every day, from simple nozzle swaps to full head replacements.
Your sprinkler heads need the right pressure to throw water the distance they’re designed to cover. When pressure drops, the spray falls short. The areas farthest from each head, often the edges and the spaces between heads, get little or no water.
Common causes of low pressure:
How to check it: Look at the spray distance. If heads aren’t reaching each other, pressure may be the issue. Also watch for soggy spots, sinking soil, or puddles that never seem to dry. Those can point to a leak underground that’s stealing pressure from the rest of the system.
A quick note on high pressure: Too much pressure can also cause dry spots. Instead of solid streams, water turns into a fine mist that blows away in the wind or evaporates before it hits the ground. If your heads look foggy when they run, the pressure may be too high.
At LaPorte Sprinkler Repair, we use pressure testing, flow rate testing, and leak detection tools to find out exactly what’s happening inside your lines, even when the problem is buried out of sight.
A sprinkler head doesn’t have to be broken to cause problems. If it’s tilted, sunk too low, or turned in the wrong direction, it may be soaking your driveway, sidewalk, or fence instead of your grass.
This happens more often than people expect. Soil settles. Grass grows up around the heads. Edging and mowing nudge them out of position. Over a season or two, a perfectly aimed head can drift off target.
Signs to look for:
How to check it: Run each zone and note where the water actually lands. Make sure every head sits straight and level with the ground. Small adjustments can make a big difference, but if a head keeps shifting, the riser or fitting below it may need repair.
Each zone in your system is controlled by a valve. When a valve fails, the zone it controls might not turn on at all, might only open partway, or might not shut off properly.
If one entire section of your yard is drying out while the rest looks healthy, a bad valve is a strong suspect.
Signs to look for:
How to check it: Run each zone manually from your controller. If one zone doesn’t respond, the issue could be the valve, its solenoid, or the wiring connected to it. Some valves also have a flow control handle that may have been turned down by accident.
Valve and solenoid problems are best handled by a professional, since they involve both plumbing and electrical parts. Our team offers valve repair and solenoid repair to get every zone running properly again.
Sometimes the system works exactly as designed, but the design itself has gaps. Proper sprinkler layouts use what’s called “head-to-head coverage.” That means the spray from each head should reach all the way to the next head. When heads are spaced too far apart, the areas in between stay dry.
Coverage problems can also show up when:
How to check it: try the “can test.” Place several empty, straight-sided containers, like tuna cans or plastic cups, around one zone. Run that zone for 15 to 20 minutes, then compare how much water is in each container. Big differences point to uneven coverage.
Our coverage analysis service takes the guesswork out of this. We map how water is spreading across your lawn and recommend adjustments so every part of your yard gets its share.
Your controller is the brain of your sprinkler system. If it’s sending the wrong signals, or no signals at all, parts of your lawn won’t get watered no matter how healthy the rest of the system is.
Common controller and wiring issues:
How to check it: Start by reviewing your controller settings. Confirm that each zone has the right start times, run times, and watering days. Check the seasonal adjust percentage and make sure the rain sensor isn’t blocking scheduled cycles. If the settings look right but a zone still won’t run, the problem may be in the wiring.
Electrical issues can be tricky to trace. Our team provides controller repair, wiring repair, rain sensor repair, and full electrical diagnostics to find and fix the fault.
Before you call, these simple steps can help you narrow down the cause:
What your findings might mean:
What You See | Likely Cause |
Single dry patch near one head | Clogged, broken, or misaligned head |
Dry edges and gaps between heads | Low pressure or poor coverage |
Entire zone drying out | Faulty valve, solenoid, or wiring |
Misty, foggy spray | Water pressure too high |
Soggy spots plus dry spots | Underground leak |
Whole lawn struggling | Controller settings or rain sensor |
To be fair, not every dry spot comes from your irrigation. Compacted soil can keep water from soaking in. Chinch bugs are a common problem in St. Augustine lawns and can leave brown patches that look a lot like drought stress. Fungal disease and pet urine can cause similar damage.
That’s one more reason a professional inspection helps. When our technicians test your system and confirm it’s working properly, you know to look elsewhere. Our soil moisture testing can also show whether water is actually reaching the root zone.
Some fixes, like clearing a clogged nozzle or adjusting a tilted head, are simple enough to handle yourself. But many dry spot problems start underground or inside the system’s electrical parts. Guessing can cost you time, water, and money.
When you call LaPorte Sprinkler Repair, you get:
We find the real cause, explain what’s going on in plain terms, and fix it right the first time.
Dry spots won’t fix themselves, and they tend to get worse the longer they’re ignored. Whether it’s a broken head, a sneaky leak, or a controller that needs a reset, LaPorte Sprinkler Repair can track down the problem and restore even, healthy coverage across your entire yard.
Call 832-353-1516 today to schedule your service appointment. Let our team take care of the repairs so you can get back to enjoying a lush, green lawn.
